Nokia x6 cahrger not supported



Here's a solution that shows the location of BTEMP resistor that caused Charger Not supported on Nokia X6 if damaged. This components needs to replace if cahrger not supported shows on the LCD screen display when the battery charger is being plug-in.




Read More>>

Nokia x6 connecting USB problem








If having problem connecting from USB to PC on Nokia X6, this solution may help if the device is not detected after ensuring that the USB cable wire is okay. The device driver is properly installed but the problem still exists.

This solution shows the particular components might caused faulty or damaged and result to a problem connecting to the PC through USB port
Read More>>

Nokia X6 having a No Network Signal





Here's the solution that may help and guide to repair Nokia X6 having a No Network Signal reception. If ever tried to restore and update the device firmware but nothing happens, this solution shows the corresponding RF circuit of Nokia X6 PCB board that might something wrong, faulty or being damaged.

Read More>>

Nokia x6 Bluetooth, WGPS ireless LAN and connection problem




Bluetooth, Wireless LAN and GPS connection problem can be cause by a firmware failure and can be easily be fix by restoring, updating or flashing the phones firmware again. But after doing any firmware repair and the problem still exists the problem may certainly lies on the hardware components failures.

This solution below may possibly useful and help fix and repair Nokia X6 Bluetooth, WLAN and GPS problem issues for it shows the Bluetooh, WLAN and GPS component circuit.


Read more >>
see Diagram

Nokia x6 Touch scren problem

Nokia x6 Touch scren problem








If ever trying to fix Nokia X6 touch screen failure issues and you'll do replacing the touch plate module, trying to calibrate the touch screen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exist and the touch screen left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case only a hardware repair may only help solved the problem.
This solution below show the Nokia X6 PCB board components that holds and control the touch screen panel to work.
Reed More>>

Nokia x6 send and end key solution

Nokia x6 send and end key solution

Keypad keys malfunction on Nokia X6 may also possibly caused by a faulty keypad flex, cleaning or by replacing it will help solved the problem.see diagram Red more>>>

Nokia X6 camera button and volume control switches

Nokia X6 camera button and volume control switches

if something went wrong with Nokia X6 camera button and volume control switches that stop responding when being pressed. Button and switches may stop to function if being broken or damaged and sometimes cause by an oxidation. Simply by replacing it will fix the problem.
If the said button switch is okay seems working but still unresponsive you may then consider that the problem may lies on a faulty circuit components on the PCB board.

Nokia x6-00 charger not soport

This solution will show you and guide X6 charging problem problems such as not charging, the charger plug-in if no response. This common problem occurs when the handset is said is damaged by a liquid or water damage, excessive charging voltage supply of the device or by using a non-compatible charger

Nokia x6-00 Power switch ways jumpers

if charging is ok but not getting power on nokia x6 it means the power switch is not working ok so you have to change power switch button in this situation in nokia x6.if power button is damage and prints are also damage this diagram is too much useful it this condition.so make these jumpers as shown in diagram attached with this post.

Nokia x6-00 lcd light solution

you can then check this solution to the corresponding parts shown below.

The solution was found that the LCD display LED driver circuit board X6.
You need to monitor, track, in particular items highlighted on the above solution to replace a number of simple procedures are to follow

Nokia x6-00 insert sim solution

Insert SIM card problem may happen and shows on the LCD screen display, if the SIM card inserted on the mobile phone device is already damaged but IF the SIM card card is working good and the device handset will not accept any kind of SIM card, the problem may lies on the device itself. This may happen if the mobile phone is damaged by a liquid or water damaged and any means of accidental damage by the standard user.

Here's solution that may help possibly help fix and repair Nokia X6 Insert SIM card problem.

This solution shows the SIM card circuit on Nokia X6, including The line tracks of the SIM card pin connector through to each corresponding solder ball bumps of the IC components (AVILMAS) that holds the SIM card to work.